Corrosion Resistant Solenoid For Pneumatic Actuator

Corrosion Proof Solenoid for Pneumatic Actuator
Corrosion Proof Solenoid

IDEAL FOR OUTDOOR OR AGGRESSIVE ENVIRONMENTS.

  • Body made of rugged composite material.
  • All metal parts stainless steel.

CORROSION PROTECTION FOR ACTUATOR SPRINGS AND INTERNAL SURFACES.

  • In 3/2 form, exhaust feed back ensures only clean dry instrument air enters the spring chamber.

SIMPLE INSTALLATION.

  • NAMUR mount for direct installation on the actuator.
  • Each port numbered in the moulding for easy connection.
  • Simple, reliable electrical connection by weatherproof DIN connector.

CHOICE OF ELECTRICAL OPERATING VOLTAGES.

  • 24V AC or DC, 110 or 220 VAC, Specify at time of order.

MANUAL OVERRIDE

corrosion proof solenoid with manual override
Manual Override Control

A red screw provides manual override for operation without an electrical signal.

      • With the indent aligned with 0 the valve is under electrical signal control.
      • With the indent aligned with 1 the valve is actuated to the energised position.

IMPORTANT NOTE

THERE IS A SMALL INDENT ON THE RED BUTTON, THIS INDENT MUST ALIGN WITH THE 1 OR THE 0. NOT THE SCREW DRIVER SLOT. IF THE SCREW DRIVER SLOT IS ALIGNED WITH 1 OR 0 THEN THE VALVE MAY NOT OPERATE ELECTRICALLY OR THERE WILL BE EXCESSIVE AIR CONSUMPTION.

Re purpose application
Application Selection Plate

VALVE CAN BE RE PURPOSED BY RE POSITIONING SELECTION PLATE.

APPLICATIONS.

  • Use 3/2 configuration for spring return actuators.
  • Use 5/2 configuration for double acting actuators.